FLAMINGO Brake Fluid DOT3

Flamingo DOT3 Brake Fluid is a high-quality, non-petroleum-based hydraulic brake fluid formulated for use in all disc and drum brake systems requiring DOT3 specifications. It delivers reliable braking performance under various driving conditions and helps prevent brake fade, corrosion, and wear.

⭐ Key Features:
✅ High Boiling Point
Resists vapor lock and brake fade, ensuring consistent braking performance even in high-temperature conditions.
✅ Corrosion Protection
Contains rust and oxidation inhibitors to protect metal components in the braking system.
✅ Safe for All DOT3 Systems
Compatible with all vehicles requiring DOT3 brake fluid, including cars, motorcycles, light trucks, and ATVs.
✅ Smooth Brake Operation
Maintains proper viscosity and performance for smooth and responsive braking.
✅ Prevents Seal Wear
Formulated to extend the life of rubber seals and other internal brake system components.
✅ Moisture Resistant
Slows down moisture absorption to reduce the risk of brake system damage.

🛠️ How to Use Flamingo DOT3 Brake Fluid:
⚠️ Note: Always refer to your vehicle’s service manual before use.
Park Safely
Ensure the engine is off, and the vehicle is parked on a flat surface. Let the brakes cool before opening the reservoir.
Locate the Brake Fluid Reservoir
Usually found near the back of the engine bay on the driver’s side.
Clean the Cap Area
Wipe off any dirt or debris to avoid contamination when you open the reservoir.
Check Fluid Level
Inspect the existing fluid level and its condition (should be clear, not dark or dirty).
Add DOT3 Fluid if Low
Slowly add Flamingo DOT3 Brake Fluid up to the “MAX” level.
Avoid overfilling.
Close the Cap Securely
Ensure the reservoir is sealed tightly after filling.
Test the Brakes
Press the brake pedal a few times to ensure firmness and proper brake operation.

🧪 Maintenance Tip:
Brake fluid should be replaced every 2 years or as per your vehicle manufacturer’s recommendation.
Always use the correct fluid type (DOT3) specified by your vehicle.